WKO
Vishay Draloric
Ceramic AC Capacitors
Class X1, 440 VAC/Class Y2, 300 VAC
DESIGN:
D Max.S Max.Disc capacitors with epoxy coating
3 Max.RATED VOLTAGE UR:
(X1):
440 VAC, 50 Hz (IEC 60384-14.2)250 VAC, 60 Hz (UL1414, CSA C22.2)
V ± 0.5RoHSCOMPLIANTF ± 1L = 30- 3 orL = 10±1(Y2): 300 VAC, 50 Hz (IEC 60384-14.2)
DIELECTRIC STRENGTH BETWEEN LEADS:
Component test:
2600 VAC, 50 Hz, 2 s
As repeated test admissible only once with 2340 VAC, 50 Hz, 2 s
Random sampling test (destructive test): 2600 VAC, 50 Hz, 60 s
Ø d ± 0.05• Dimensions in mm
Impedance (Z) as a function of frequency (f) at Ta = 20 °C(average). Measurement with lead length 50 mm.Z [Ω]10 1DIELECTRIC STRENGTH OF BODY INSULATION:
2600 VAC, 50 Hz, 60 s (destructive test)
DISSIPATION FACTOR tan δ:
10 04700 pF39003300220015001000680470330220150100684733 pF≤ 25 • 10-3
INSULATION RESISTANCE Ris:
≥ 6 • 109 Ω
10 -1CATEGORY TEMPERATURE RANGE ϑA:
(- 40 to + 125) °C
CLIMATIC CATEGORY ACC. TO EN60068-1:
10 -21I = f (UR) (typ.)80010f100300[MHz]40/125/21
COATING:
Epoxy, dipped, insulating, flame retarding acc. to UL 94V-0
I~ [μA]4.7 nF7006005004003002001000 01.0 nF2.2 nFTAPING AND SPECIAL LEAD CONFIGURATIONS:On request
3.3 nFMARKING:
WKO440 ~ X1300 ~ Y2 33p MWKO 2n2 MIEC 384-14/2440 300 250 ~ X1 Y2220 pF 50100150200250300350400WKO 33 pF to 1.0 nFWKO 1.5 nF to 4.7 nF
All approval marks are also shown on the label.
Document Number: 22204
Revision: 31-Jan-06
UR[V~]www.vishay.com48
For technical questions, contact slcap@vishay.comWKO
Ceramic AC Capacitors
Class X1, 440 VAC/Class Y2, 300 VAC
ORDERING INFORMATION, CERAMIC X1 / Y2 CAPACITORS WKO
CAPACITANCE**(pF)
CLASS 1N7503347
CLASS 2K120068
CLASS 2K1500100
CLASS 2K2000150220330
CLASS 2K4000470680100015002200330039004700
TOL.(%)± 10 %, ± 20 %± 10 %, ± 20 %± 10 %, ± 20 %
D x s(mm)8.0 x 5.08.0 x 5.08.0 x 5.08.0 x 5.08.0 x 5.08.0 x 5.08.0 x 5.08.0 x 5.09.0 x 5.010.0 x 5.012.0 x 5.013.0 x 5.015.0 x 5.016.0 x 5.018.0 x 5.0
F ± 1*(mm)7.57.57.5
d ± 0.05*(mm)0.60.60.6
V ± 0.5*(mm)1.61.91.9
ORDERING CODEWKO330CPKRWKO470CPKRWKO680CPKRWKO101CPKRWKO151CPKRWKO221CPKRWKO331CPKRWKO471CPKRWKO681CPKRWKO102CPKRWKO152CPKRWKO222CPKRWKO332CPKRWKO392CPKRWKO472CPKR
Vishay Draloric
± 10 %, ± 20 %7.50.61.9
0.6
7.5
0.8
12.5
2.0
± 10 %, ± 20 %
1.6
* Standard lead configuration, other lead spacing and diameter available on request.
** Capacitance values from 1000 pF to 4700 pF: The alternative usage of smaller VKO series is recommended for new application.
ORDERING CODE
R7th digit10th to 12th digit14th digitCapacitance Tolerance:
Lead Configuration (see General Information)RoHS Compliant Component± 10 % = K± 20 % = M
APPROVALSIEC 60384 - 14 / 2nd Issue (1993) incl. Am. 1 (1995) - Safety TestsEN 132 400 (1994) - Safety TestsThat approval together with the CB Test Certificate substitutes the national approval of the following nations:BelgiumFranceItalyAustriaChinaJapanDenmarkGreeceLuxembourgPortugalSingaporePolandGermanyIrelandNetherlandsSwedenSloveniaHungariaFinlandIcelandNorwaySwitzerlandKoreaIsraelY2 - Capacitor: CB-Test Certificate:DE-1-11134-A1X1 - Capacitor: CB-Test Certificate:DE-1-11134-A1Minimum thickness of insulation: 0.4 mmUnderwriters Laboratories Inc.UL 1414Line-by-pass component.Agency Files / LicencesCanadian Standards AssociationCSA C22.2No 1-98Line-by-pass component.Agency Files / LicencesE 183 844 V1 S333 pF ... 4.7 nF250 VacE 183 844 V1 S333 pF ... 4.7 nF250 Vac33 pF ... 4.7 nF 33 pF ... 4.7 nF 300 Vac440 VacSpainUnited KingdomCzech RepublicORDERING INFORMATION
WKOSERIES
392CAP. VALUE
KTOLERANCE
CPRATED VOLTAGE
CJ0LEAD
CONFIGURATION
KINTERNAL CODE
RRoHSCOMPLIANTwww.vishay.com
49
Document Number: 22204Revision: 31-Jan-06
For technical questions, contact slcap@vishay.com
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained hereinor in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of anyinformation provided herein to the maximum extent permitted by law. The product specifications do not expand orotherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressedtherein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by thisdocument or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unlessotherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in suchapplications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resultingfrom such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regardingproducts designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000Revision: 18-Jul-08
www.vishay.com
1
